BARLOW SWING-ARM TASK SCONCE – ASSEMBLY INSTRUCTIONS
Thank you for selecting RH Baby & Child lighting. Our assortment is crafted with the highest quality materials that coordinate
perfectly with our Baby & Child bedding collections, making it easy to create an elegant nursery or child's bedroom. Each
item's surface is sealed, which eliminates the need for polishing and ensures a lasting finish for years to come.
PARTS ENCLOSED:
(B) Mounting Plate (1)
(E) Canopy Screws (3)
(F) Swing Arm (1)
(G) Shade (1)
(H) Canopy (1)
(I) On/Off Switch (1)
(K) Electrical Cord (1)
(L) Wall Anchors (2)
(M) Wall Screws (2)
IMPORTANT SAFETY INSTRUCTIONS:
This sconce can be used as a plug-in or a fixed unit when used with the appropriate
conversion kit. For your safety, this sconce is equipped with a 3-pronged polarized plug.
If the plug does not fit securely into your outlet, do not force it – contact a professional
electrician. Use the plug with an extension cord only if it can be fully inserted into the
cord's socket. Never alter the plug in any way.
This fixture is designed for use with LED beads. To avoid the risk of fire, do not change the
lamp for use with any other LED beads.
WARNINGS:
All wires are connected. When unpacking, be careful not to pull wires, as a bad
connection may result. Do not connect electricity until the fixture is fully assembled. To
reduce the risk of fire, electrical shock, or personal injury, do not try to replace the LED
beads, as they are non-replaceable. Do not touch the LED beads when fixture is turned
on. Keep flammable materials away from lit LED beads.
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.
Keep out of reach of children under 3 years of age.
PLUG-IN ASSEMBLY & INSTALLATION:
1. Carefully remove all parts from the box and remove all plastic coverings.
2. Drill 2 holes into the wall that align with the holes on the mounting plate (B) of the
sconce and insert wall anchors (L).
3. Place mounting plate (B) onto the wall anchors (L), then screw wall screws (M) into
anchors.
4. Attach the canopy (H) to the mounting plate (B) and use canopy screws (E) to secure.
5. Adjust the swing arm (F) and shade (G) to get desired angle and height.
6. Plug into proper electrical outlet and turn the on/off switch (I) to test fixture.
CARE INSTRUCTIONS:
Do not use polishes or cleaners, as they will damage the finish.
Wipe clean with a soft, dry cloth.
BARLOW SWING-ARM TASK
SCONCE
Plug-In Installation
