(D) 1/4" x 1 1/4" Allen Bolt = 8 pcs
Plain Washer = 8 pcs
Lock Washer = 8 pcs
Hex Nut = 8 pcs
Allen Wrench = 1 pc
11 X 70
Open Wrench = 1 pc
STEP 2
MATTRESS SUPPORT ARM ASSEMBLY
STABILIZER RAIL ASSEMBLY
MATTRESS HEIGHT ADJUSTMENT
HARDWARE FOR STEP 2
DETAIL C
DETAIL D
Allen Bolt (D)
Stabilizer Rail
Allen Bolt (D)
ALlen Wrench
Hex Nut
Open Wrench
Lock Washer
Plain Washer
Allen Bolt (D)
C
D
STEP 2.1
Lay mattress support flat with stabilizer rail on each side.
NOTE:
On each end of the arm of the mattress support, there is a hole
for the bolt to pass through that corresponds to the holes located
in the frame of the mattress support.
STEP 2.2:
Insert the bolt into the desired hole of the frame through the hole
on the arm support. Fasten the bolt with plain washer, lock
washers & hexagonal nut provided. Repeat procedure on other
arms of the mattress support. See
DETAIL C
.
WARNING:
Set the mattress support to the desired height by adjusting the
support arms. The mattress support should be at its highest
setting for newborns, then adjusted to the lower positions as the
child grows and becomes mobile. Once the child is able to
stand, the mattress support should be at its lowest position.
STEP 2.3:
Install the stabilizer rail at ends of the arm support, as illustrated
in
DETAIL D
.
7/9
Summary of Contents for Airin Spindle Crib
Page 1: ...1 1 1 9 ...
