0
1
USING THE SCREW-DOWN CROWN
DO
NOT
PULL THE CROWN UNLESS IT IS
FIRST:
2
3
NOTE:
Failure to SECURELY screw down the crown
after setting the watch may affect its water
resistance.
TO UNSCREW:
Turn the
crown anti-clockwise until it
turns freely without tension.
GENTLY pull the crown out to
the other desired positions for
watch setting (see specific
operating instructions on the
following pages).
TO SCREW:
Push the crown
ALL THE WAY IN (towards the
watch) THEN begin to turn
clockwise until it is securely
screwed down.
BEFORE YOU USE THIS WATCH, IT IS
RECOMMENDED THAT YOU MANUALLY WIND
THE MAINSPRING TO START IT MOVING.
THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED
WITH A MANUAL WINDING MECHANISM.
WINDING THE MAINSPRING
1. Unscrew the crown by turning it
anti-clockwise.
2. When it is in position [
1
], turn the
crown clockwise to wind. Wind
5-10 times and it will start to move
naturally after shaking slightly.
3. Push the crown in then screw it
securely.
0
1
Summary of Contents for OHIO RG-8034-66 OHIO RG-8034-22 OHIO RG-8034-11 OHIO RG-8034-55 OHIO RG-8034-77 OHIO RG-8034-99 OHIO RG-8034-11 OHIO RG-8034-11
