15
Valve parts worn or damaged.
Disassemble valve and replace worn or damaged parts.
Saw operates, but
blade does not cut.
Blade loose, spinning on drive
wheel.
Blade installed opposite to
manufacturer’s cutting
rotation.
Blade teeth dull.
Wrong blade used for material
being cut.
Ensure (2) #10 socket head cap screws are tightened securely
as described in Chapter 4.
Check for correct cutting rotation of blade. If installed
incorrectly, remove and install correctly.
Remove blade and sharpen, or install a sharp, new blade &
drive wheel.
Install blade recommended by manufacturer for material to be
cut.
WARNING:
ANY BLADE FROM YOUR SUPPLIER MUST MEET THE DESIGN CRITERIA LISTED IN
CHAPTER 2. USING BLADES ON THIS SAW THAT DON’T MEET THESE REQUIREMENTS
CAN CAUSE EQUIPMENT DAMAGE AND/OR PERSONAL INJURY.
