3
2
SPECIFICATIONS
2.1
INTRODUCTION
Your RS17 RingSaw is a hydraulic direct drive saw that is a rugged versatile tool that cuts cleanly, fast, precisely, and
straight through concrete, steel, stone, wood, composition material, or hard fiber when equipped with the appropriate
abrasive, diamond, or carbide tipped blade. The slim line design of the saw allows cuts to be made within inches of a wall
or an obstruction. The saw is equipped with an adjustable 180º blade guard, water hose connection port for wet cutting
and 12-inch long hose whips. An arbor wrench is provided for removing and installing blades. As with most hydraulic
tools, the hydraulic system requirements detailed in the following sections must be met but not exceeded to support tool
performance and longevity of equipment.
The following features are provided:
12-inch hose whips
Blade drive wheel
Trigger actuated water supply
Trigger lockout
Ergonomic handle design
2.2
TECHNICAL DATA
The following specifications apply to the RS17 RingSaw.
ENGLISH
METRIC
Tool Physicals
Weight without hoses & blade
30 lbs.
(13.7 kg)
Length (w/o blade)
28 in.
(711 mm)
Length (w/ Blade)
30.1 in.
(765 mm)
Width
11.5 in.
(292 mm)
Maximum Blade Diameter
17 in.
(432 mm)
Drive Wheel Diameter
2.2 in.
(56 mm)
Hydraulic Requirements
Type of System
Open-Center
Flow Rate
12 gpm
(45 lpm)
Max Pressure Range
2000-2500 psi
(138-172 bar)
Max Pressure Relief Setting
2500 psi @ 12 gpm
(172 bar @ 45 lpm)
Filtration
10 microns (nominal)
Back Pressure (Max)
78 psi
(5.5 bar)
Hose Length (Max)
150 ft.
(45 m)
Couplings
1/2” HTMA flush face
Water Requirements for Wet Cutting
2.5 psi @ 50 gpm
(1.1 lpm @ 3.4 bar)
Operation
Power
17.5 Hp
( 13 kw)
Torque
218 in.-lbs.
(25 Nm)
Speed @ 12 gpm
2340 rpm
Cutting Depth
12.5 in.
(317 mm)
