RGBlink VSP 168HD User Manual Download Page 99

Page: 99 / 100

VSP 168HD User Manual 99

Software

Upgrade

The VSP 168HD software upgrade steps are as follows:

1. Communication Firmware Upgrade

Upgrade by copy the file, the name of the file is: WEBSE. Bin, and upgrade steps are as

follows:

(1) Connect the USB interface of VSP168HD to the computer with a USB cable.

(2) Plug in the power cord, and make sure the device is in normal operation.

(3) Push MENU button, and enter [USB UPGRADE] option, operation steps are:



SYSTEM



USB UPDATA



SEL.

(4) Open the USB drive that plug into the computer, and delete the "firmware. Bin" file in

the USB drive, then copy the MCU file "WEBSE. Bin" of VSP168HD to the USB

drive, program loading is complete after the file has been copied.

(5) Restart the device, and enter the menu to check if the version is right, factory reset is

completed. Operation steps are: MENU



SYSTEM



SYSTEM INFO



MCU VER.

2. CORE Panel Upgrade

Upgrade by copy the file, the name of the file is: VIDEO.fvb, and upgrade steps are as

follows:

(1) Connect the USB interface of VSP 168HD to the computer with a USB cable.

Summary of Contents for VSP 168HD





































































































Search results

Summary of Contents for VSP 168HD

Reviews:

Related manuals for VSP 168HD

Brands by name

Popular brands

RGBlink VSP 168HD, User Manual

Search results

Summary of Contents for VSP 168HD

Reviews:

Related manuals for VSP 168HD

Brands by name

Popular brands