Chapter 1: Your Product
RMS 8424S User Manual
1.2.1 Back Panel
Input Connectors
4
DVI-I – DVI
Standard DVI signals can input. Additionally this DVI port supports VGA with the use of
a DVI to VGA adapter.
The DVI port supports up to HDMI 1.3 if the port format is set to HDMI.
6
BNC – 3G-SDI
Standard 3G-SDI signals can input.
8
BNC-CVBS
Standard CVBS signals can input.
Output Connectors
3
DVI-I – DVI LOOP
Connect to the DVI input of the next RMS 8424S or the device with DVI input.
5
BNC – 3G-SDI LOOP
Connect to the SDI input of the next RMS 8424S or the device with SDI input.
9
BNC – CVBS LOOP
Connect to the CVBS input of the next RMS 8424S or the device with CVBS input.
Note: it is valid only when switch the signal to AV channel.
Control Connectors
2
TALLY
TALLY control port (RS-232). The electrical level is as follows:
Electrical level: ≤5V
Voltage
Tally light condition
≤0.5V
ON
≥1.3V
OFF
