© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| [email protected] | www.rgblink.com
37
NDI | HX only supports audio format AAC.AAC 48000KHz 64kbps is recommended.
2) NDI|HX Video Encoding Parameter Configuration
High bandwidth mode: Main Stream
Low bandwidth mode: Sub Stream
Recommendation for Configuration of Video Encoding Parameters:
1, 1920 * 1080: 4096 kb/s
2, 1280 * 720: 2048 kb/s
3, 640 * 480: 1024 kb/s
3, 640 * 360: 1024 kb/s
4, 320 * 180: 512 kb/s
4, 320 * 240: 512 kb/s
The higher the bit rate, the better the image quality.Self-configuration according to the actual situation.
Instruction:
1. The high and low bandwidth is switched on at the same time, which can be switched by users according to the
actual situation.
2. The frame rate affects the video delay, and the higher the frame rate, the smaller the video delay.
3.The HEVC(H265) format has been supported since NDI4.5, while the previous version only supported the H264
format.
4.When the video frame rate is 60 frames, two streams can be turned on at most at the same time. It is
recommended not to acquire other streams when NDI is turned on, so as to ensure the smooth flow of NDI
video.
5.Video Out is used for SDI and HDMI. Since SDI and HDMI are turned on by default, it is recommended to adjust
the Video Out Format to 720PX with X representing the frame rate.
