© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| [email protected] | www.rgblink.com
30
1) Login as administrator
User name, password, the default admin PTZ control can be carried out, zoom, focus, video capture, sound,
zoom, full screen and set the preset position, run, and delete; you can preview, configuration, log off.
2) Login as normal user
Default User name/password: user1 or user2 PTZ control can be carried out, zoom, focus, video capture,
sound, zoom, full screen and set the preset position, un,and delete; you can preview and log off.
NOTE: There is no configuration right for normal user login.
3.6 Configuration
Click Configuration to enter into the device parameters setting page
There are the following options: audio configuration, video configuration, network configuration, PTZ
configuration, internet access configuration, system configuration, detailed description see the following table.
3.6.1 Local Configuration
Video Preview Mode:
user can choose real-time priority or fluency priority: The delay will be small when under
real time priority mode and fluency will be good when under fluency priority mode.
Setting based on the user need (Default value: real time normal (2),real time best
(1),fluency normal (3),fluency good (4) and fluency best (5))
Recording packing time(minute):
Set recording video packing time (default is 10,range from 1~120 minutes)
Recording/Snapshot file storage route:
Set local recording video/snapshot file storage route. (Default D: \
MyIPCam\)
Click the Save button to make settings effective.
3.6.2 Audio Configuration
Switch:
Choose to enable the audio or not.
Compressing format:
Set audio compressing format and the device will reboot automatically after change
(default MP3,PCM,AAC optional)
Sampling frequency:
Set sampling frequency and the device will reboot automatically after change (default
44100,16000,32000 and 48000 optional)
Sampling precision:
Set sampling precision (default 16bits)
Compressing code rate:
Set audio compressing code rate (default 64bits,32,48,96,128bits optional)
Note : Click “SAVE”,it will remind”Enable has changed. Restart the device to take effect after the success of
Menu
Explanation
Local configuration
Including video preview mode,record video packing time,record video storage route
settings etc.
Audio configure
Including audio compressing format,sampling frequency,sampling precision,compressing
code rate settings etc.
Video configure
Including video encoding,stream release,RTB Broadcasting,video
parameters,character-overlapping,character size,video output setting etc.
Network configure
Including basic parameters,Ethernet,DNS, GB28181 etc.
System configure
Including equipment property,system time,user management,version
update,Reset,Reboot device settings etc.
