©
Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | [email protected] | www.rgblink.com
38
5.
Chip selection:
select the chip for the corresponding module.
Data Type:
It is generally to choose parallel driver for common modules by default (If you would like to
customize some modules needed to select serial data, please contact with our company.
Module Type:
If width of single module is 16,then choose
【
Regular light board
】
.If not,then choose
【
Profiled lamp
board(with taps)
】
.
the actual number of:
the width of single module
Number of data rows:
the height of single module
Number of data line:
It can be viewed according to the number of RBG groups defined by the module interface.
Line decoding mode:
138 decoding,etc
Number of data sets:
Conventional and Serial can be selected.
Cascade direction:
Left to right/Right to left/Top to bottom/Bottom to top
6.
Users can remove the
√
of
【
state changes automatically
】
, and click 1/2/3/4 to change the display state
according to the observation of the LED screen.
For example,click
【
1
】
and observe the color of LED screen,and select
【
red
】
if the LED screen shows red.
After all 4 states being done,click
【
next
】
