RGBlink G3 NET 2K Quick Start Manual Download Page 40

Page: 40 / 48

Address

：

S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197 Fax: 00865925788216

Email: [email protected] http://www.rgblink.cn

7. Turn the rotary knob, and select <Connection Type> for <Port 1>, <Port 2>, <Port 3>, <Port 4>, push the

knob to confirm. G3 NET 2K support 8 kinds of connection type, including

and

. For example:

8. Turn the rotary knob, and select <Offset Settings>, push the knob to confirm, turn the rotary knob, and set

Port 1/2 Offset X, Port 1/2 Offset Y, Port 3/4 Offset Y as 0, and set Port 3/4 Offset X as 256, shown as follows:

9. Turn the rotary knob, and select <Position Settings>, push the knob to confirm, turn the rotary knob, and set

Port 1 X Position and Port 1 Y Position as 0, set Port 2 X Position as 128, Port 2 Y Position as 0, set Port 3 X
Position and Port 3 Y Position as 0, set Port 4 X Position as 128, Port 4 Y Position as 0, shown as follows:

The connection figure is shown as below:

->Port 1/2 Offset X

Port 1/2 Offset Y

Port 3/4 Offset X

256

Port 3/4 Offset Y

->Port 1 X Position

Port 1 Y Position

Port 2 X Position

128

Port 2 Y Position

->Port 3 X Position

Port 3 Y Position

Port 4 X Position

128

Port 4 Y Position

Port 1

Wall Size W*H: 1*1

Panel Pixel W*H: 128*256

->Connection Type

Summary of Contents for G3 NET 2K

















































Search results

Summary of Contents for G3 NET 2K

Reviews:

RGBlink G3 NET 2K, Quick Start Manual, Page: 40 / 48

Search results

Summary of Contents for G3 NET 2K

Reviews: