background image

 

 

Address

S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C                 

Tel: 00865925771197                  Fax: 00865925771202 

                                                                                                                        Email: [email protected]        http://www.rgblink.cn 

7

 

How to Switch between Input and Output Channel

 

DXP A0808 can rapidly switch any way signals by the front panel buttons, specific operations are as 

follows: 

1.  Push the number button to select the input channel, for example, push the button [3]. 

2.  Push the number button again to select the output channel, for example, push the button [5]. 

3.  After selection, push the button [Enter] to confirm. 

Note: 

Input channel: The signal that will be switched to output channel.   

          Output channel: The signal that connected to display device. 

          The number [1]~[8] means channel 1~8. 

 

 

How to Switch One Input to all Outputs

 

1.  Push the number button, for example, push the button [2]. 

2.  Then push the button [ALL], and input 2 will be switched to all outputs. 

User can also operate by the following ways: 

1.  Push the button [ALL]. 

2.  Then choose the input channel, for example, push the button [2]. 

3.  Push the button [Enter] to confirm.   

 

 

How to Close One Output Channel

 

1.  Push the button [0] on the front panel. 

2.  Choose output channel, for example, push the button [8]. 

3.  Push the button [Enter] to confirm. 

 

Summary of Contents for DXP A0808













Reviews: