Address
：
S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
9
How to Call Pre-set Input and Output Channel Saving
Mode
1. Push the button [Rec] on the front panel.
2. User can choose 25 kinds of mode from button [0]~[24], for example, push the button [7].
3. Push the button [Enter] to confirm.
Note:
[0] is default for one-to-one correspondence for input and output way. That is input [1] is
corresponding to output [1], input [2] is corresponding to output [2]
…
How to Factory Reset
1. Push the button [Menu] on the front panel.
2. Push the button [30+] DOWN arrow button, or button [20+] UP arrow button, make RESET option
for selected state.
3. Push the button [Enter] to confirm and enter the initialization interface.
4. Push any button according to the LCD hint and complete factory reset.
How to Read Equipment Related Information
1. Push the button [Menu] on the front panel.
2. System default STATUS option, if it is not selected, push the [30+] DOWN arrow button or [20+] UP
arrow button and choose <STATUS>.
3. Push the button [Enter] to confirm, read the information by the [30+] DOWN arrow button or [20+]
UP arrow button.
