©
Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | [email protected] | www.rgblink.com
4
Screen logo Instruction
Power on the device first, waiting bonding for 2~5 minutes.
IP address will be seen after successful bonding.
No.1 USB port: disconnect to network;
Please check the SIM card installation and whether the SIM card runs out of
credits.
No.1 USB port: connect to network;
Signal value:0%~5%
No.1 USB port: connect to network;
Signal value:25%~50%
No.1 USB port: connect to network;
Signal value:50%~75%
No.1 USB port: connect to network;
Signal value:75%~100%
No.1 USB port: connect to network but does not acquire signal value, which
does not affect bonding.
Ethernet port: connect to network via network cable and be bonding.
Ethernet port: plug in network cable but does not connect to the network.
Please check whether the cable connection is normal.
Upload date speed,2 seconds later than actual speed.
Download date speed,2 seconds later than actual speed.
Battery level (once optional battery installed)
Summary of Contents for bond 6
Page 1: ...Quick Start bond 6...
