Stock Code 873117 en.rgble.com 400-1661-021
P/N: S00302
91
r subnet!
Read subnet
92
s subnet 255.255.255.252!
Setup subnet at 255.255.255.252
93
r gateway!
Read gateway
94
s gateway 192.168.1.1!
Setup gateway at 192.168.1.1
95
r port!
Read control port
96
s port 8000!
Setup control port at 8000
97
r sleep time!
Read switcher sleep time (no signal to standby mode time)
98
s sleep time 1!
Set switcher sleep time (no signal to standby mode time)
(1: OFF, 2: 15seconds, 3: 1minutes ,4: 5minutes, 5:15minutes, 6:
60minutes)
99
r osd time!
Read OSD time out
100
s osd time 1!
Set OSD time out
(1: 5seconds, 2: 10seconds,3: 15 seconds,
4: 20seconds, 5: 25 seconds, 6: 30seconds)
5.9
Web GUI Control
The switcher can be controlled via Web browser, which contains General, Setup and Network Settings.
After the active Ethernet link
with an RJ45 terminated
cables are connected, the IP address is obtained
and the IP address is entered in the Web browser, the switcher can be controlled.
If IP address is
unknown,
there are two methods to obtain the IP address.
1. Obtain the IP address and port number via the information from the MENU-> Network OSD by the
remote control.
2. Obtain the IP address and port number via RS-232 Controller.
For example, the obtained IP address is 192.168.1.100 and port number is 8000. Input
http://192.168.
1.100
in the address bar of the web browser.
1) General page
2) Video page