Stock Code 873117 en.rgble.com 400-1661-021
P/N: S00302
5.4
Remote Control &IR Operations
5.4.1
Remote Control
①
Press this button to power on the switcher or set it to standby mode.
②
ADJ: Press this button for operate VGA input auto adjustment
function;
③
INPUT: Press these buttons for select the input sources.
④
RES: Press this button to select HDMI output resolution. (Press and
hold 5 seconds or more, the HDMI output resolution will reset to
720p60Hz.)
⑤
Menu operation buttons:
MENU: press to enter in OSD menu.
EXIT: press to exit OSD menu.
OK: confirm button.
UP/DWON/LEFT/RIGHT buttons: OSD value setting.
⑥
VOLUME: Control master audio volume buttons.
⑦
MIC: Control MIC input audio volume buttons.
5.4.2 IR operations
As IR signal can be transmitted bi-directionally between the switcher and the HDBT receiver, it is able to
use the IR remote to control the switcher or HDMI source devices.
1)
Control far-end device locally
To control the switcher or remote display device by using corresponding remote controller.
2)
Control local device from remote
To control the switcher or local source device by using the corresponding remote controller.
3)
IR (20KHz---60KHz) cable introduction