manualshive.com logo in svg

RGB Spectrum MediaWall 2000, User Manual

Share
Download
RGB Spectrum MediaWall 2000 User Manual Download Page 3

. . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LIMITED WARRANTY

RGB Spectrum (RGB) warrants that this product will be free from defects 
in material and workmanship, under normal use and service when 
correctly installed and maintained, for a period of one (1) year from date 
of shipment. RGB’s liability under this warranty is limited solely to 
replacing, repairing or issuing credit for any product which is shown to 
be defective during the warranty period. Purchaser shall (i) notify RGB 
Spectrum promptly in writing of any claims, and (ii) provide RGB 
Spectrum with an opportunity to inspect and test the product claimed to 
be defective. Warranty does not cover misuse, abuse, improper 
installation or application, improper maintenance or repair, alteration, 
accident or negligence in use, improper temperature, humidity or other 
environmental condition, storage, transportation or handling. RGB 
Spectrum shall have no obligations under this warranty with respect to 
any defect unless it receives notice and a description of such defect no 
later than five (5) business days following the expiration of the warranty 
period.

THE WARRANTIES STATED HEREIN ARE IN LIEU OF ALL OTHER 
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING (BUT NOT 
LIMITED TO) ANY IMPLIED WARRANTIES OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALL RGB SPECTRUM BE LIABLE FOR ANY 
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR 
LOSS, DAMAGE OR EXPENSE DIRECTLY OR INDIRECTLY ARISING 
FROM THE PURCHASER’S INABILITY TO USE THE PRODUCT 
EITHER SEPARATELY OR IN COMBINATION WITH ANY OTHER 
EQUIPMENT OR FACILITIES, OR FROM ANY OTHER CAUSE.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

EXTENDED WARRANTY

An annual extended warranty may be purchased.  Should the product 
fail to operate properly during the covered period, RGB Spectrum will 
repair the product and restore it to normal operation without charge for 
labor and parts.  For further information on obtaining an extended 
warranty, email [email protected] or call (510) 814-7000. 

Summary of Contents for MediaWall 2000








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands