background image

Important Information

It is important for your facility to implement and enforce the following

guidelines in order to keep all equipment functioning properly.

User Training

It is the responsibility of the 

facility 

 to implement structured training

procedures for all employees using the system.  Only users who have received
adequate training on the use of the system should use the system.

Failure to adequately train employees may cause equipment failure due to

user error.  In addition, incorrect use of the equipment may also result in
equipment failure.

System Maintenance

It is the responsibility of the 

facility 

to establish and facilitate a regular

maintenance schedule of  your (Safe Place

®

) system.  This includes regular

inspection, testing, and cleaning.

Failure to provide regular maintenance to these products may result in

equipment failure.

Installation and Configuration

It is the responsibility of the 

facility

 to use the supplies specified by RF

Technologies for all (Safe Place

®

 ) installations.

Failure to use the supplies specified by RF Technologies may result in

equipment failure.

RF Technologies, Inc. (herein referred to as “Seller”), warrants to the Buyer that the RF
Technologies, Inc. (Code Alert/Safe Place/Sensatec) System (herein referred to as
“Product”) will be free from defects in material and workmanship for a period of one (1)
year from date of sale and title, and will conform to the Seller’s quotation.

Transmitter battery life is one (1) year or as quoted for sale. Battery is covered by a limited
warranty prorated over the life of the battery. The Battery warranty only applies to
battery life and does not include casings or clamps, which is one (1) year as stated
elsewhere in this warranty.

This warranty is a limited warranty and it is the only warranty made by Seller. Seller’s sole
obligation under this warranty shall be limited to repairing or replacing any part, which,
within one(1) year from the date of sale, is returned to the factory, shipment prepaid, and
upon examination by Seller, shall disclose to have been defective. Alternatively, Seller
may, at its sole option, instead elect to refund the purchase price paid for the defective
product. The criteria for all testing shall be Seller’s applicable product specifications
utilizing factory specified calibration and test procedures and instruments. No allowance
shall be made for local repair bills or expenses without the prior written approval of Seller.
If Seller elects to replace any part, such replacement will not extend the life of this
warranty. Seller reserves the right to use refurbished parts for warranty repairs or
replacements. Buyer’s failure to pay the purchase price in full by the due date will void all
warranties for the product.

Warranty coverage does not include, and Seller disclaims any liability for, any defect or
performance deficiency (including failure to conform to product descriptions or
specifications) which results, in whole or in part, from (1) improper storage, handling,
maintenance or installation of the Product by Buyer, its employees, agents, or contractors,
(2) absence of any product, component, or accessory recommended by Seller, but
omitted at Buyer’s direction, including but not limited to transmitters and banding
materials not tested and approved, (3) any design, specification, or instruction changed
by Buyer, its employees, agents, or contractors, (4) failure to comply with any applicable
instructions or recommendations of Seller, including installation procedures, (5) physical
damage occurring to transmitters or other components after receipt and acceptance by
buyer, or (6) any components, systems, process, or equipment not sold or provided by
Seller, or (7) acts of God, acts of civil or military authority, fires, floods, strikes, or other
labor disturbances, war, riot, or other causes beyond the reasonable control of the Seller.

The preceding paragraphs set forth Buyer’s exclusive remedies and Seller’s sole liability for
claims based on the failure of the products to meet any warranty, whether the claim is in
contract, warranty, tort (including negligence and strict liability), or otherwise, and
however instituted, and upon the expiration of the applicable warranty period of such
liability shall terminate. 

IN NO 

EVENT SHALL SELLER BE LIABLE FOR ANY

DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY

Product Warranty

Summary of Contents for Safe Place Mother Transmitter











Reviews: