Testing and Care
Baby Check Transmitters User Guide
Page 21 of 28
0510-1124-I
Baby
Check
Transmitter
The following testing is required for all
transmitters in use. All steps are mandatory.
1. Test the operation of transmitters by
perform a match using the Baby Check
transmitter and a working Infant
transmitter.
2. Visually inspect transmitters for damage
or loose parts.
3. Verify that the warranty expiration date
stamped on the transmitter has not
expired. If the warranty period has
expired, discard and replace the
transmitter immediately.
4. Your facility must keep records of test
and transmitter inspection.
Transmitter
Clearing
Device
1. Verify that the warranty expiration date
that is stamped on the device is not
expired. If the warranty period has
expired, discard and replace the device
immediately.
2. Visually inspect the device for damage
or loose parts.
Test the operation of the transmitter clearing
device using the Transmitter Tester (PN
9450-0050). The transmitter tester will
detect whether or not a transmitter is
emitting a signal, but cannot indicate the
strength of the signal
1. Place the transmitter tester directly on
the transmitter clearing device.
2. Press and hold the button on the left
side of the transmitter tester.
3. The device beeps once when you
initially press the button.
Summary of Contents for Safe Place Baby Check
Page 1: ...Baby Check Transmitters User Guide ...
Page 31: ......
