RFT CU2 Manual Download | Manualshive

Page: 31 / 60

background image

31

Operation and mechanisms

ONE Spring return actuator for remote control

The spring-return actuator ONE is designed to easily operate Rf-t fire dampers of all sizes, automatically or remotely. Five models are
available, 24 or 230 volt, with FDCU or FDCB position switches; and 24 volt with plug (ST).

1.  unlocking button
2.  blade position indicator
3.  LED
4.  battery compartment to reset motor
5.  plug (ST)

2

1

3

4

Options - at the time of order

IXI-R1

Universal field controller (Modbus, BACnet or analog connection), pre-mounted on the damper.

IXI-R2-24

Universal field controller (Modbus, BACnet), pre-mounted on the damper and with a connection for a second damper.

IXI-R2-230

Universal field controller (Modbus, BACnet), pre-mounted on the damper and with a connection for a second damper.

Unlocking

∎

manual unlocking

: shortly press the unlocking button (1) once.

∎

automatic unlocking

: the fusible link reacts as soon as the temperature in the duct reaches 72°C.

∎

remote unlocking

: by interrupting the power supply.

Resetting

∎

manual resetting

: open the battery compartment (4) and press a 9V battery against the contact springs. Hold this position until

the LED (3) emits a continuous light. Check whether the indicator (2) shows that the damper blade is in the open position. Remove
the battery, the LED fades away. Close the battery compartment.

∎

motorised resetting

: switch off the power supply for at least 5 sec. Power the actuator (respect the prescribed voltage) for at least

75 sec. The resetting stops automatically when the end of range is reached (damper open).

Caution:

If the LED (3) flickers fast (3x/sec.), the battery is discharged: use a new battery.

If the LED (3) flickers slowly (1x/sec), the resetting is in progress.

If the LED (3) is continuously on, the resetting is complete and the motor is powered.

If the actuator detects voltage on the power cable, a brief contact of the battery is enough to start the resetting process.

The power supply of this actuator cannot be individually replaced. If the cable is damaged, the whole unit must be discarded

and replaced.

The housing of the mechanism contains a temperature sensor. When the temperature in the housing exceeds 72°C, the

mechanism unlocks. The LED flashes twice per second. When the temperature drops below 72°C, the mechanism can only be
reset in a motorised manner after a manual reset (with a battery).

The end of range switches need 1 second after operation to adopt a stable position.

prod. < 1/7/2015

prod. ≥ 1/7/2015

CR60(1s)

CR120

CU-LT

CU-LT-1s

CR2≤400

CU2≤1200

CR2>400

CU2>1200

CR60(1s)

CR120

CU-LT

CU-LT-1s

CR2≤400

CU2≤1200

CR2>400

CU2>1200

Kit ONE















«
...
29
30
31
32
33
...
»

Summary of Contents for CU2





























































Reviews:

No comments

Related manuals for CU2

Brand: STABILUS Pages: 4

Brand: Orlaco Pages: 4

Brand: JRClancy Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands