RFT CU2 Manual Download

Page: 14 / 60

Storage and handling

As this product is a safety element, it should be stored and handled with care.

Avoid:

• any kind of impact or damage
• contact with water
• deformation of the casing

It is recommended:

• to unload in a dry area
• not to flip or roll the product to move it
• not to use the damper as a scaffold, working table, etc.
• not to store smaller dampers inside larger ones

Installation

General points

∎

The installation must comply with the installation manual delivered with the product and the classification report.

∎

Axis orientation: see the declaration of performance.

∎

Avoid obstruction of adjoining ducts.

∎

Product installation: always with closed damper blade.

∎

Verify if the blade can move freely.

∎

Please observe safety distances with respect to other construction elements. The operating mechanism must also remain

accessible: allow for a clearance of 200 mm around the housing.

∎

The air tightness class will be maintained if the damper is installed according to the installation manual.

∎

Rf-t fire dampers are always tested in standardised constructions according to EN 1366-2. The achieved results are valid for similar

supporting constructions with a fire resistance, thickness and density equal or superior to the supporting construction used
during the test.

∎

The damper must remain accessible for inspection and maintenance.

∎

Schedule at least two running visual checks each year.

2017

2018

2019

2020

2021

TEST





Summary of Contents for CU2





























































Search results

Summary of Contents for CU2

Reviews:

Related manuals for CU2

Brands by name

Popular brands

RFT CU2, Manual

Search results

Summary of Contents for CU2

Reviews:

Related manuals for CU2

Brands by name

Popular brands