Static WAN Configuration
This section lets you configure Static WAN IP settings.
WAN Static IP
: Enter the static IP address.
WAN Subnet Mask
: Enter the subnet mask.
WAN Gateway
: Enter the WAN Gateway IP.
DNS:
Enter the DNS Server IP Address.
When in DHCP client mode, these 4 columns show the IP settings obtained
from the network.
DHCP Client
This section lets you configure the WAN port as a DHCP Client. This is the Factory Default mode.
Enable DHCP Client?
: Select to enable WAN as a DHCP Client.
Status
: This shows the status of the WAN port, whether it has obtained a IP lease or not.
Apply and Reset
After making the necessary changes, make sure you hit Apply and Reset.
Ensure that you do this for every updated page.
Page
15
