SEM910
Bridge Commands
Command
Description
help
Displays help screen for command
access <accesscode>
Sets access code to allow slave SEM onto to
Master’s network. Slave accesscode must match
accesscode of desired Master
filter [disable, bcast,
mcast, show]
Selects filtering operation and level.
login [enable|disable]
Enables/disables accesscode/password login
authentication. Must be set in master and slave
master
Sets SEM as Master bridge
password <pwrd>
Sets login password. Slave password must match
password of desired Master SEM
slave
Sets SEM as Slave bridge (default)
bridge
status
Displays status of active connections
access Sets
the
accesscode
portion of the
accesscode/password
pair to allow slave
SEMs to connect to a master SEM.
accesscode
must match the
accesscode
in the
master SEM.
filter
Selects Ethernet traffic filtering mode.
filter disable
turns filtering off.
filter bcast
filters out broadcast and
multicast packet while
filter mcast
filters out just multicast packets.
filter
show
displays the filter settings.
login
Turns the authentication login requirement off and on. When on, Enabled, an
accesscode and password must be entered in the slave SEM that matches the
accesscode and password of the master SEM with which the slave SEM wants to
establish a connection. Note that the network number of the SEMs must also agree.
See the section
Radio Commands
for details on the network number. This feature
prevents unauthorized SEMs from connecting to a SEM network.
master
Sets the SEM as the Master SEM.
password Sets
the
password
portion of the
accesscode/password
pair to allow slave SEMs
to connect to a master SEM. Password must match the password in the master SEM.
slave
Sets the SEM as a Slave SEM.
status
Displays the status of active SEM connections.
©
2000- 2004 Cirronet
™
Inc
23
M-910-0003 Rev -
