RFE 6KW DS Series Service Manual Download Page 30

Note: RF EXPOSURE SAFETY DISTANCE (only for FCC & IC) RF Exposure Limits for 
United States of America, according to FCC regulation: setting to the maximum of the 
output power of the apparatus, to guarantee the limits of exposure declared within this 
document, it is necessary that the antenna gain used with this device should be 0dBi or less 
and all persons should maintain a minimum separation distance of the following distances; 
depending on the output power of the transmitter for general uncontrolled exposure and 
general controlled exposure.  

RF Exposure Limits for Canada, according to IC regulation: setting to the maximum of the 
output power of the apparatus, to guarantee the limits of exposure declared within this 
document, it is necessary that the antenna gain used with this device should be 0dBi or less 
and all persons should maintain a minimum separation distance of the following distances; 
depending on the output power of the transmitter for general uncontrolled exposure and 
general controlled exposure.  

Limites d'exposition RF pour le Canada, conformément à la réglementation IC: réglage au 
maximum de la puissance de sortie de l'appareil, pour garantir les limites d'exposition 
déclarées dans ce document, il est nécessaire que le gain d'antenne utilisé avec cet 
appareil soit de 0 dBi ou moins et toutes les personnes devraient maintenir une distance de 
séparation minimale des distances suivantes; en fonction de la puissance de sortie de 
l'émetteur pour une exposition générale non contrôlée et une exposition générale contrôlée. 

For 

6000

 Watt:  FOR USA/FCC – 1

583

 cm 

 

FOR Canada – 

1970

 cm 

 

 

 

Summary of Contents for 6KW DS Series































Reviews: