TX Pole User Manual
Page
19
of
24
–
Version 1
–
Status
–
ISSUED FOR USE
Document Number
–
PRJ-TXP-MAN-002
Figure 12 - Tower configuration on Android.
4
Antenna Recommendation
The RFD TX Pole has three antenna connectors: one for the Wi-Fi and two for the 900 MHz
communication link. Any antenna with a male RPSMA fitting and matched to the 2.4 GHz and to the
902-928MHz ISM band respectively can be used, however the ones supplied along with the
TX Pole and shown in figure 13 are recommended for almost every application. For other antenna
options visit our store at
Figure 13
–
a)
900MHz 3dBi Half Wave Dipole Antenna (RPSMA)
,
Antenna 2.4GHz 5dBi Dipole (RPSMA)
Any of the two 900 MHz antennas can be left unmounted if antenna diversity is not to be used. For
further detail about the diversity options that the modem inside TX Pole provide, refer to the RFDesign
Modem 900x Datasheet, the link of which can be found in section 6 of this document:
