The system is programmed with PC via Web browser. There are two options.
Option 1. Setting IP address with DHCP and accessing by using UpnP protocol
1. Connect Ethernet cable from RFT-847CI to the existing LAN with a router
2. RFT-847CI is recognised automatically by router. In some routers power must be switched OFF and
again ON
3. Go to Network Task and double click “Show icons for networked UpnP devices”. Then you see that
RFT-847CI is connected network.
4. Double click RFT-847CI to get the web access.
5. When prompted for the login and password, then write “webadmin” for both. Then you see the main
menu (see below).
Option 2. Setting RFT-847CI via default IP address
1. Connect Ethernet cable from RJ 45 connector to computer.
2. The factory set IP address of each RFT-847CI is 172.16.1.1 and subnet mask is 255.255.255.0.
3. Set the IP of PC to e.g 172.16.1.2 and sub net mask to 255.255.255.0.
4. Open the web browser like IE, Firefox, Opera etc…
5. Write to address field 172.16.1.1 and then enter.
6. Set log in and password “webadmin” for both. Then following screen displays.
This screen is the default entry to the HTML interface.
The menu structure is in three levels e.g SYSTEM
NETWORK
Status. The selected option is
highlighted.
RF-Tuote Oy, Joensuunkatu 13, 24100 Salo, tel. +358-2736 6360, fax. +358-2-736 6360, [email protected], www.rf-tuote.fi
