At the front page can be seen the status of receivers (input frequency, bitrate, BER, power level, C/N) and
modulators (output frequency, bitrate, fullness degree) and select the menu language (EN or DE)
4. DVB configuration
4.1 Tuner
To set tuner parameters go to INITIALIZATION. For satellite signal set all parameters, for terrestrial/cable
signal only frequency is needed.
Set the correct parameters for tuner 1. and select SCAN. Repeat same for tuners 2, 3 and 4.
RF-Tuote Oy,Joensuunkatu 13, 24100 Salo, tel. +358-2736 6360, fax. +358-2-736 6360,
