3.3 Set-up
To start set-up, press Menu key . Main Menu will be displayed.
Select “Configuration”.
Select “Scan Multiplex” and write the frequency of input multiplex and press “Scan”.
You can adjust transponder frequency using numeric keys, left and right keys or double arrow keys.
It takes few minutes to scan multiplex. After multiplex have been scanned you can select programs.
You can scroll the list using up and down arrow keys.
To select a programs for outgoing mux press SYS key. The meaning of symbols are + = program selected
(default after transponder scan). $ = not in use, - = program is not selected . To save and exit
marked program and press OK key.
RF-Tuote Oy, Joensuunkatu 13, 24100 Salo tel. +358-2736 6360, fax. +358-2-736 6355, [email protected], www.rf-tuote.fi
