Testing and Care
Safe Place Transmitters User Guide
Page 29 of 36
0510-1121-G
Replacing
the Clamp
In some cases, you need to replace
damaged transmitter clamps. This is done
by opening the existing clamps, snapping
them off of the transmitter, and inserting
new clamps.
To replace a transmitter clamp:
1. Open the clamps all the way and gently
remove them from the transmitter.
2. Insert the first clamp into the transmitter
by inserting the right oval-shaped pin
into the hole on the right of the
transmitter.
3. Next, line the left oval-shaped pin up
with the hole on the left side of the
transmitter.
4. Gently snap the left oval-shaped pin into
the hole.
5. Close and secure the clamp.
Summary of Contents for Safe Place Patient
Page 1: ...Safe Place Transmitters User Guide...
Page 39: ......
