RIoT-MINIHUB Quickstart Guide
Page: 6
QS-RIOT-MINIHUB-1
1. Press and hold the SETUP Switch on the RIoT-MINIHUB until the DATA
LED on the front panel stays ON. (takes ~5 seconds),
2. Release the SETUP Switch
3. The Data LED will now Flash 2X.
RIoT
-MINIHUB is now broadcasting its
own Wi-Fi SSID
4. On your Smart device run the Wi-Fi Wizard App
5.
RIoT
-MINIHUB SSID will appear on the Smart device app,
6.
Select “MHXXXX” and “Connect” to open the Wi
-Fi Setup page.
Complete the Table :
7. Select your local Wi-Fi network and enter
Wi-Fi Password
8.
Press “set” and “Reboot”
9. After reboot (allow 30 seconds), the RIoT-
MINIHUB will login to the local Wi-Fi and the
LED will illuminate
10. Check the Red Data LED is on constantly,
indicating that RIOT-MINIHUB is registered
on the local WiFi
Exit from the App and proceed to Stage 2
Stage
1
Configure RIoT-MINIHUB to your local Wi-Fi
This Option uses the RIoT Wi-Fi Wizard App
And a Smart device
RIoT-MINIHUB Quickstart Guide
Page: 11
QS-RIOT-MINIHUB-1
Stage
Description
5
Configure an RF Sensor/Switch Transmitter
6
Direct Control Local RF Remote Control Relay Switching
7
Alerts! Setup Push notifications to your Smart device
Additional Optional User Settings
