Appendix D Hayes References
RFI-148 250W VHF Paging Transmitter User Manual
Page 34 of 43
ATI90[
p
]
Current status parameter
Returns the current value of a status parameter where
p
selects a parameter. See Appendix E for the sensor
reference.*
ATI91[
p
]
Maximum status
parameter
Returns the maximum recorded value of a status
parameter. See Appendix E for the sensor reference.*
ATI92[
p
]
Minimum status
parameter
Returns the minimum recorded value of a status
parameter. See Appendix E for the sensor reference.*
ATI93[
p
]
Status parameter upper
cut-off
Returns the upper cut-off value of a status parameter
where
p
selects a parameter. See Appendix E for the
sensor reference.*
ATI96[
p
]
Status parameter lower
cut-off
Returns the lower cut-off value of a status parameter
where
p
selects a parameter. See Appendix E for the
sensor reference.*
ATI151
Clear All Latched Faults
Clears all faults in the latched state.
Table 15: Hayes I-Register Commands
* The parameter
p
is an integer index, as shown in the Index column of Table 17
Command
Name
Notes
ATS45
Transmit Power
Get or set transmit power in Watts.
ATS54
Current Channel
Get or set the current channel.
ATS100[
p
]
Baud
Get or set the baud rate for serial port
p
.
1: 300
2: 600
3: 1200
4: 2400
5: 4800
6: 9600
8: 19200
9: 38400
10: 57600
11: 115200
ATS101[
p
]
Parity
Get or set the parity for serial port
p
.
0: None
1: Even
2: Odd
ATS102[
p
]
Data Bits
Get or set the data bits for serial port
p
.
0: 7
1: 8
ATS103[
p
]
Stop Bits
Get or set the stop bits for serial port
p
.
