RFX-RMT-II SD/HD
LAST REV: DEC 2007
22
Operator’s Manual
RF ExtremeCare: 866.732.0113
8.4.8 Presets
Note:
The function Presets should be distinguished from the Function Preset mentioned in
8.4.5 and 8.4.6
The function Preset allows the complete configuration of the transmitter to be stored and
loaded; this includes channel frequency, definition, video and audio inputs etc. A total of 4
Presets may be accessed, additionally a Default factory setting is provided.
8.5 Engineering Menu – MPEG2 mode
The engineering menu is entered by pressing the ‘CANCEL’ and ‘ENTER’ buttons
simultaneously for 2 to 10 seconds. When ‘ENGINEERING MENU’ appears, press the
‘ENTER’ button by itself to navigate the engineering menu headings.
8.5.1 Control Mode
The RMT-II has 3 possible control modes
•
Switches - selection of channel frequency and PA On/Off is selected from the push
button menu or via the two front-panel rocker switches
•
Keypad - Control is via the 6 push buttons in conjunction with the menu tree
•
Remote - Control is via RS232 / RS485 remote control
•
The
E
nter button allows the
▲▼
buttons to select the required value. The
E
nter
button then stores the value and returns to the Main menu.
8.5.2 Prog Channels
Each of the 10 preset frequency channels (mentioned in 8.4.1) can be independently re-
programmed as required by the user.
The
▲▼
buttons are used to select the channel to be assigned. The
E
nter button then
allows the four
A B
▲▼
buttons to edit the required frequency. The
E
nter button then
stores the value and returns to the Main menu.
8.5.3 No video action
The action of the unit in the event of no video at the input can be set to:-
•
Black screen
•
Power amplifier muted
•
Color bars
•
The
E
nter button allows the
▲▼
buttons to select the required value. The
E
nter
button then stores the value and returns to the Main menu.
