RFX-RMR
Issue 1.0
page 12 of
41
5 FRONT
PANEL
CONTROLS
Front panel view of the RFX-RMR
The front panel of an RFX-RMR comprises two 2-way switches (On/Off and Analog/Digital), a 10-way
rotary switch (BAS channel number), six push button switches (used to navigate the various RFX-
RMR menus) and an LCD display.
Also fitted are three LEDs – ‘DC’ (Green), ‘Status’ (bi-color green/red), and ‘Local’ (bi-color green and
amber)
On/Off Switch
Down for Off, up for On
Digital/Analog switch
Down = Analog transmission, Up = Digital transmission. This function
can also be controlled via the push buttons and RFX-RMR menus.
Channel
Rotary, 0-10. 1= BAS channel 1, 2 = BAS channel 2, etc to 0 = BAS
channel 10. Please note that the BAS channels can be switched between the ‘current’ plan and the
‘new’ plan via the push buttons and RFX-RMR menus. The exact frequency selected by either method
is shown on the top menu page on the LCD display.
‘DC’ LED
Lit green whenever a correct DC voltage is presented to the RFX-RMR
Receiver. This LED will be lit irrespective of whether the unit is switched ‘on’ or ‘off’.
Status LED
Stable Green indicates that the RFX-RMR is functioning correctly. A
flashing green light indicates that the RFX-RMR is functioning correctly but that no valid RF signal is
present at the input to the receiver. A stable red light indicates that the unit has an alarm condition.
Local LED
Indicates whether the ‘channel’ and ‘analog/digital’ switching controls are
being accepted from the front panel rocker switches or from the push button menu. Green light =
rocker switch operation, amber light = push button menu operation.
Full details of the push button menu structure can be found in section 8.
