Reznor RIHL, Installation Operation & Maintenance

Page: 21 / 24

21 I-RIH (05-21) 131793-A
Burner Replacement
Replace the burner (as necessary) as follows:
1 . Remove screw and slide burner assembly backward (see
Figure 15 , DETAIL A) .
2 . Pull burner assembly up and outward (see Figure 15 , DETAIL B) .
3 . Check to ensure that there is spark gap clearance of 0 .219 (±0 .032) inches (5 .6 mm) from ceramic tile surface
to the sparking tips of electrode (direct spark) assembly (see Figure 15 , DETAIL C) .
4 . Reverse steps 1 and 2 to re-install burner assenbly .
Figure 15. Burner Replacement
DETAIL A
DETAIL B
DETAIL C
BURNER
SPARK GAP
CLEARANCE
ELECTRODE (DIRECT
SPARK) ASSEMBLY
BURNER ASSEMBLY
CERAMIC TILE
SCREW