Euro-C 4000-JLGBEN
23/31
Table 6 : Centre distances combustion air inlet flue outlet (refer to fig. 10)
Model
Connection Ø
mm
Centre distance A
mm
Cabinet hole size
required for sealing ring
mm
4011
80
120
92
4015
80
120
92
4018
100
140
112
4024
100
140
112
4030
100
140
112
4036
130
225
142
4047
130
225
142
4060
130
225
142
4072
130
225
142
4100
130
225
142
9.1.4 The combustion air inlet duct must not
pass through the cabinet panel by more
than 50 mm.
9.1.5 When the DJL model is to be used as a
type B22 appliance i.e. combustion air
being taken from the space to be heated,
a protection grille complying with IP 20
must be installed at the inlet point of the
cabinet (see figure 11)
9.1.6 Attention must be given to properly seal
the mounting flange of the heating
module (see figure 12).
9.1.7 A gas service inlet (PVC) sealing ring is
also provided for the appliance for size
R ¾”.
The hole size required for this seal ring in
the casing is 50 mm diameter.
All cables and wires passing through the
casing of the burner/controls section
should be via strain relief bushings. It is
recommended that sealing is
accomplished by the use of the sealed
ring type.
Connections between the burner module
controls compartment must be effectively
sealed from the appliance air-stream so
the pressure within the combustion
circuit remains at ambient within the
compartment.
9.1.8 A viewing port for the purpose of
ascertaining the operation of the burner
should be included. The viewing port may
be located behind a door or panel
provided that when the door or panel is
opened the combustion circuit remains in
its
“sealed”
condition so that burner
operation is not upset.
Figure 11: Arrangement for class B22 appliance
& gas service inlet
NOTE
:
POOR COMBUSTION LEADING TO A HAZADROUS SITUATION CAN RESULT FROM EITHER POSITIVE OR
NEGATIVE PRESSURES WITHIN THE COMBUSTION CIRCUIT.
Summary of Contents for EURO-C 4000 DJL
