94" Building Width
Step 4
Set Wall Panels
Nail wall panels together using 10d sinkers.
Secure panels to floor.
Step 5
Layout Truss Spacing
Layout sidewall plate for truss spacing. Mark the first line 19-3/4" from the inside of the rear wall.
Then place more marks 24" on center. Repeat process for the opposite sidewall.
Important:
When marking the opposite wall, place the 'X' mark on the same side of the line so
your trusses are parallel when they are installed. Check the width in the center of the building.
The width should be 94", measuring from the outside of the 2x6s.
24"
19-3/4"
