Cut the siding flush with the bottom plate if installing on a cement slab.
Siding Extends 3/4" Below Plate
LAP Edge
10. Repeat to assemble the another side wall.
LAP
6.
Position a 48" wide wall frame between (2) two 72" wall frames as shown below. Nail
frames together with (4) four 10d sinkers staggered on each side.
7.
Square wall frame. Measure diagonally (corner to corner). The measurements will be the
same when the wall is square.
Step 6B Assemble Side Walls Continued
8.
Install the first siding panel with the 'LAP edge' flush the end of the wall and extending 3/4"
below the bottom plate. Use 6d galv. nails spaced 8" apart.
9.
Install (2) two more siding panels. You can install the last siding panel now or after the walls
are erected so the panel will be easier to handle.
72" Wall Frame
72" Wall Frame
48" Wall Frame
