Reya Dolphin Pro 12V60A, Operating And Users Manual, Page: 7 / 15

CONNECTIONS CONNECTIONS
UK
AC CABLES AND CIRCUIT BREAKER
AC wiring
Check the quality of connections and proper
tightening of connections.
For mains power, preferably use a HO7RNF-type
industrial cable. Ensure that you comply with the
following recommendations.
AC circuit breaker
The AC mains power line must feature a cut-off
device with differential protection, to specifically
protect individuals against electric shocks.
The circuit breaker’s sensitivity must be 30mA.
Its current capacities comply with the charger’s
power consumption. Comply with the following
recommendations in this respect.
N.b. : The charger has an internal protection fuse
on the L1 supply, in the event of a general fault on
the circuit board in particular. Due to the irrever-
sible nature of this fault, the fuse is not accessible
for maintenance of any kind.
DC CABLES AND FUSES
DC wiring
Check the quality of connections and proper
tightening of connections.
Battery cables must be as direct and short
as possible.
Each battery output can provide the charger’s
full amperage and all the cables must have
identical cross-sections. Ensure that you comply
with the following recommended cross-sections.
These chargers are equipped with airtight
grommets with “automatic” opening.
Simply pressing the central section of the
membrane is sufficient to allow the cable to
pass through the grommet.
NOT-DOLPROREYA-03 NOT-DOLPROREYA-03
Charger
capacity 220-240V AC 50Hz
Length < 5m (16ft) 100-120V AC 60Hz
Length < 5m (16ft)
12V 60A 2.5mm2 / AWG13 4mm2 / AWG11
12V 90A 2.5mm2 / AWG13 4mm2 / AWG11
24V 40A 2.5mm2 / AWG13 4mm2 / AWG11
24V 60A 2.5mm2 / AWG13 4mm2 / AWG11
24V 100A 4mm2 / AWG11 6mm2 / AWG9
Charger
capacity
Length < 2m (6ft)
Length between 3
and 5m (10 to 16ft)
12V 60A 25mm2 / AWG3 35mm2 / AWG2
12V 90A 35mm2 / AWG2 50mm2 / AWG0-1
24V 40A 16mm2 / AWG5 20mm2 / AWG4
24V 60A 25mm2 / AWG3 35mm2 / AWG2
24V 100A 35mm2 / AWG2 50mm2 / AWG0-1
Charger
capacity
Mains power 220-
240V 50Hz Mains power 100-
120V 60Hz
12V 60A 8A – 30mA 16A – 30mA
12V 90A 8A – 30mA 16A – 30mA
24V 40A 8A – 30mA 16A – 30mA
24V 60A 10A – 30mA 20A – 20mA
24V 100A 20A – 30mA
-