RexXer Tuning GmbH
l Astheimer Str. 41 l DE - 65428 Rüsselsheim l Fon: +49 (0) 6142 / 793971-203 l Fax: +49 (0) 6142 / 793971-80
www.rexxer.eu
© by RexXer ECU Tuning
19
2) T
he setup selects the installation folder by its own.
Figure 9: Installation folder
: Is selecting by its own.
To continue press “Next”.
Please make sure that the RexXer EVO User is not yet connected at
this time to the USB cable and your computer. If so, please
disconnect it now and also all other devices/hardware which are
connected via USB. After installation, you can connect all the
equipment again.
3)
Run the setup to finish. After completing the installation, the software
RexXerEVOUser
automatically starts.
Please connect now the RexXer
EVO User with the USB cable.
Figure 10: completion of setup:
On pressing “Install”,
the software is installed and the setup is finished.
