RexXer Tuning GmbH
l Astheimer Str. 41 l DE - 65428 Rüsselsheim l Fon: +49 (0) 6142 / 793971-203 l Fax: +49 (0) 6142 / 793971-80
www.rexxer.eu
© by RexXer ECU Tuning
14
IMPORATANT
: The RexX
er EVO User gets “married” with the vehicle
identification number (VIN) stored in the engine control unit (ECU). This
enables the device to communicate with the ECU also after an Update
with a Workshop tester or another programming device. The Tuning-
Mapping will be overwritten by an update, after that the Tuning-Mapping
can be re-transferred with the RexXer EVO User at any time. (except
ECU-Type Eldor EM 2.0!)
However, we recommend to reflash the Original-Mapping
before
each
service/inspection.
By using a Mapping without lambda deactivation, we recommend to
disconnect the lambda-plugs
after
the writing process!
Reset parameter after flashing process
At the end of each programming and after each reading of a mapping,
it’s necessary to make the TPS reset and the sensor parameters reset
(not supported by all ECU types!). These functions can be found in the
menu item
Diagnosis
. Select the menu item
My Vehicle
.
These service functions are not supported by all ECU types! For
example, the ECU Siemens M3C, leads from the TPS reset
automatically! KTM models just let run for 15 minutes while standing
without throttle movement after programming. The TPS reset and the
sensor parameters will be done automatically during this time.
Please contact your dealer for any questions.
Start the engine and enjoy the new driving experience!
PLEASE NOTE:
The votes of available tunes for the RexXer EVO User
were performed on a professional dyno. To ensure maximum
performance, it should be noted that the tunes used with the
constellation of the vehicle corresponds to the changes made.
Furthermore, you should be noted that the climatic conditions of your
region can play a role in the outcome to be achieved.
MAINTENANCE:
No maintenance is required.
