REXROTH IndraControl L25 CML...3N Series, Project Planning Manual

Page: 25 / 72

Standard Meaning
DIN EN 60 529 Degrees of protection (including housings and installa‐
tion compartments)
UL 508 Industrial Control Equipment
Fig.4-4: Used standards
The IndraControl L25 as well as the additionally available function
modules and the Inline terminals correspond to the CE require‐
ments!
Systems with the IndraControl L25 that are used in residential areas
(housing, business and commercial areas as well as small-sized
enterprises) require a single approval by an authority or a testing
agency. In Germany, such single approvals are issued by the ”Reg‐
ulierungsbehörde für Telekommunikation und Post (RegTP)” (Ger‐
man Regulatory Authority for Telecommunications and Posts).
4.5 UL and CSA certified
The devices of the IndraControl L25 product family are certificated according
to
●
UL508 (Industrial Control Equipment) and
● C22.2 no. 142-M1987 (CSA)
UL file no. E210730
However, there can be combinations or stages of expansions with limited or
missing certification. Therefore verify the certification by using the UL label on
the device.
To guarantee an UL- and CSA-compliant operation, the following
conditions have to be fulfilled:
●
Use only insulated copper wire suitable for at least 60/75 °C.
Loss of UL and CSA compliance due to
changes on the device.
NOTICE
The UL- and CSA- marking is only valid for the device in its delivery status. After
having modified the device the UL and CSA compliance must be verified.
4.6 Compatibility Test
All Rexroth controls and drives are developed and tested according to the latest
state-of-the-art of technology.
As it is not possible to follow the continuing development of all materials (e. g.
lubricants in machine tools) which may interact with our controls and drives, it
cannot be completely ruled out that any reactions with the materials used by
Bosch Rexroth might occur.
DOK-CONTRL-IC*L25*****-PR03-EN-P
Rexroth IndraControl L25 Bosch Rexroth AG 23/69
Technical Data