2.) Keep pressing MON & ENTER buttons and turn on the radio, there will be “TCS” or “DCS” icon
flashing.
3.) Press Mode button to choose TX or RX respectively. And then, press up/down key to choose the
code number you want. (see the table below) Press ENTER to confirm your selection.
4.) Turn off the radio to quit code setting.
Disable “Group Mode” (CTCSS/DCS) codes
1.) Select the channel you want to disable its tone code (TCS or DCS). And then, turn off the radio.
2.) Keep pressing MON button and turn on the radio. On the top of LCD will show TCS or DCS
flashing.
3.) Press UP/DOWN key to choose “OFF” to disable the tone code. And then, press ENT button to
confirm your choice.
4.) When you turn on the radio again, you will see TCS or DCS keep flashing on the top of LCD. It
means its tone code has been disabled.
If you want to enable the tone code, keep pressing MON button and turn on the radio.
And then, press UP/DOWN key to choose “On” to enable the tone code. Press ENT
button to confirm your choice.
C
TCS
S
code
code
Freq.
code
Freq.
code
Freq.
code
Freq.
code
Freq.
01
67.0
11
97.4
21
135.5
31
192.8
41
165.5
02
71.9
12
100.0
22
141.3
32
203.5
42
171.3
03
74.4
13
103.5
23
146.2
33
210.7
43
177.3
04
77.0
14
107.2
24
151.4
34
218.1
44
183.5
05
79.7
15
110.9
25
156.7
35
225.7
45
189.9
06
82.5
16
114.8
26
162.2
36
233.6
46
196.6
07
85.4
17
118.8
27
167.9
37
241.8
47
199.5
