PRIORITY SCAN:
Set the radio to the priority channel and press SCAN button. You will see the radio scanning like the
following mentioned.
Normal Scan
CH1>CH2>CH3…>CH99>CH1
Priority Scan
CH1>CH2>CH1>CH3>CH1>CH4>CH1>CH5….
Dual Watch
Dual watch is a function that allows you to scan the priority channel and one active channel.
1.) Choose the active channel.
2.) Keep pressing PRI button for 2 seconds, the radio will begin scanning between the active channel
and the priority channel.
3.) Press PRI button again to stop dual watch scanning.
TOT (Time-Out Timer)
TOT is the function that prevents from locking up a repeater or frequency by
prolonged keying of PTT. The time-out timer limits the amount of time you have to
transmit your message. When you reach the time limit which has been programmed
by your dealer, your transmission will be cut off. In order to transmit again, you must
push PTT button to reset the timer.
Disable TOT
1.)Keep pressing UP key and turn on the radio. There will be
flashing on the top of LCD.
2.)Press UP/DOWN key to choose “OFF” to disable TOT function. And then,
press ENT button to confirm your choice.
3.)When you turn on the radio again, you will see a
keep
flashing on the top of LCD. It means Time-Out Timer has been disabled.
