18
4.Click
to access the ADAS calibration page. You will initially see the
concept and a brief introduction on the calibration page. Click
Next
to access
the real calibration interface, as shown below. Move the red line up or down
align with the horizon (the intersection line between the sky and ground). Move
the yellow line up or down to the interface between the engine hood and
ground. Move the green line left or right to the focal point where the far end of
the road intersects with the horizon.
Note: The range of calibration line adjustment is limited. If the extreme
adjustment has reached the its limits and the result is unsatisfactory, it may be
necessary to adjust the mounting position of the dashcam or perform fine
adjustments of the lens so as to align it properly within all angles.
5. When the adjustment is accurate as shown above, save and exit.
ADAS Calibration
Move the red line to the
intersection line between the
horizon and Earth. Move the
green line to the focal point
where the road intersects with
the horizon. Move the yellow
line to the interface between
the engine hood and ground.
Save
Tuesday
Summary of Contents for M2
Page 1: ...M2 Users Manual ...
