Rexing H6, User Manual

Page: 22 / 136

18
Install Steps
♦ Mark the drill holes by holding the foot of the wall bracket
at the desired mounting location and marking the hole
positions.
♦ Use a drill with a 6 mm drill bit to drill the required holes
and insert the plugs and insert the wall plugs flush with the
wall.
♦ Screw the wall bracket to the wall using the supplied
screws.
♦ Mount the camera on the tripod screw and screw the
camera a little way on (about three turns).
♦ Turn the camera in the desired direction and lock it with
the lock nut.
♦ To move the camera into its final position, undo the two
pivot bolts a little, position the camera and fix the position by
tightening the two pivot bolts.
Connecting To TV
The camera can transfer the video signal to an external
monitor or a television. Please follow below instructions to
operate.
1. Connect the camera to the TV via provided AV cable.
2. Turn on the TV and set it to AV mode.