reading taken, then turns to another screen to show readings as Fig.9.
Fig. 9
4. Press the
M
button again, the display will show ‘02’, which means the second
to the last reading taken. Continue to press the
M
button to view all stored
measurements.
5.1 Clearing All Values
After a measurement is finished or when the device is in standby
mode, press and hold down the
M
button for at least 5 seconds. The
display will show ‘CLR’ which means the stored readings have been
removed as Fig.10.
Fig. 10
TH3390_RX813_RX_IB_ENG_December182018.indd 28
2019-01-02 12:07 PM
