4.5 Discontinuing a Measurement
If you do not feel well during the measurement or want to stop the measurement
for any reason, press the
O/I
button. The device will quickly release the air in the
wrist cuff and the device will return to standby mode.
5. Viewing Previously Recorded Measurements
1. The device can store 90 sets of readings and will automatically calculate the
average value of the last 3 readings taken. When the memory is full (90 sets
of readings are stored), the oldest reading will be replaced by the new one.
Memory will not clear away even if power supply is removed.
2. After a measurement is finished or when the device is in standby
mode, press the
M
button to recall memory. The display will show
the average value of the last 3 readings taken as Fig. 8.
3. Press the
M
button again, the display will show ‘01’, which means the last
Fig. 8
TH3390_RX813_RX_IB_ENG_December182018.indd 27
2019-01-02 12:07 PM
