REX RG-RH Operation Manual Download Page 18

Page: 18 / 18

Guarantee and Exemption from Liability

1. Should the machine happen to break down for no apparent reason despite normal and correct

use, repairs and service parts shall be provided free of charge as outlined below.

· Guarantee period, repairing dates, procedures and methods for providing repairs and service

parts shall be decided in consultation with the customer and distributor.

· Repairs and service parts may be charged.

· Repairs may be charged under the following circumstances:

- if the machine has not been used according to the instructions in the Operation Manual.

- if it has been used for anything other than its intended purpose.

- if it has not been repaired according to the Operation Manual or if it has been remodeled.

- if blades or consumables need replacing.

- if the machine has been handled in an inappropriate way.

2. REX will accept no responsibility under the following circumstances:

- fire, damage from flood, earthquakes, lightning or other natural disasters.

- malfunction or accident resulting from pollution or abnormal voltage.

- when the machine has not been operated according to the Operation Manual.

- when the machine has been used incorrectly, repaired or remodelled inappropriately.

3. Any costs incurred by the manufacturer shall not exceed the purchase price of the machine.

REX

REX INDUSTRIES CO.,L TD.

Overseas Sales Dept. & Factory

1-9-3, Hishiya-Higashi, Higashi-Osaka 578-0948 Japan

Tel. +81-(0)72-961-9820 Fax +81-(0)72-961-9878

http://www.rexind.co.jp

• Product specifications subject to change without notice.

8Z210-E

2202

R0040

Summary of Contents for RG-RH



















Search results

Summary of Contents for RG-RH

Reviews:

Related manuals for RG-RH

Brands by name

Popular brands

REX RG-RH, Operation Manual

Search results

Summary of Contents for RG-RH

Reviews:

Related manuals for RG-RH

Brands by name

Popular brands