If you find any abnormality with the product, check the following and, if necessary, contact your
distributor or REX INDUSTRIES CO., LTD.
Some foreign body, dirt etc.,
is acting as an insulator
between the battery and the
charger.
Remove the obstruction.
The power cord is broken.
Defective power source (e.g.
problem wih the breaker)
The charger is malfunctioning.
Replace the power cord.
Ensure the power supply is OK.
Have the charger repaired.
The green lamp does not
flash slowly, even when
the charger is connected
to the mains. (without
battery)
The red light does not come
on even after you connect
the charger to the power
supply and insert the battery;
you cannot charge the
battery.
The charger is damaged.
Have the charger repaired.
The green lamp does not
come on even if you charge
for more than two hours;
charging is not completed.
The temperature of the battery
is outside the acceptable
range for charging.
Allow the temperature to return
to within the acceptable range
(0 - 50
͠
).
The red lamp on the
charger flashes slowly.
The battery is damaged.
Replace the battery.
The red and green lamps
are on at at the same time.
Problem
Cause
Remedy
Table. 3
5. Troubleshooting
6. Servicing and Repairs
This machine is produced with great precision; therefore, should the machine fail to operate
normally, do not repair it by yourself; contact your distributor or REX INDUSTRIES CO., LTD.
If parts are required or if you have any questions, please contact us at your earliest convenience.
Availability of
Replacement Parts
Replacement parts are maintained for a period of 7 years after
production of this model has been terminated.
Electrical parts, however, will remain available for a period of 5 years.
h t t p : / / w w w . r e x i n d . c o . j p
Overseas Sales Dept. & Factory :
1-9-3, Hishiyahigashi, Higashi Osaka 578-0948, Japan
Tel.: +81 - (0)72 - 961 - 9820 Fax.: +81 - (0)72 - 961 - 9878
Specifications, colour, etc. may be changed without prior notification.
6V500
-E1
RF20SC
1209D 0500
