TIME
DATE
SU-WI
PROG
TEST
Virtually turn the dial to select the switch-on time first, e.g. Monday 06.15
Use
to select the hour, in this case 6. Then use
to set the minutes.
Programming
TIME
DATE
SU WI
PROG
TEST
TIME
DATE
SU-WI
PROG
TEST
1 2 3 4 5 6 7
0
12
24
ON
OFF
1 2
1 2 3 4 5 6 7
0
12
24
ON
OFF
6 7
1 2 3 4 5 6 7
0
12
24
OFF
ON
1 2 3 4 5 6 7
0
12
24
ON
OFF
1 2 3 4 5 6 7
0
12
24
ON
OFF
Programming is carried out in the same way as with a mechanical timer. Programming can be done in either mains or battery power mode.
After setting a program, press the OK button
to save it and view it in the program overview (see page 1). If no buttons are pressed for
1 minute during programming, the current program will be saved.
Sunday 23:00
Monday 0:00 Uhr
Testing
TIME
DATE
SU WI
PROG
TEST
TIME
DATE
SU WI
PROG
TEST
MEMO
FULL
PROG
END
1 2 3 4 5 6 7
0
12
24
ON
OFF
1 2 3 4 5 6 7
0
12
24
ON
OFF
Use
to enable the switch-on period, e.g. Monday 6:15 until Monday 10:00
Hold down the 5-way switch
to program in 15-minute increments.
Use
to alter the switch-on period.
Turn the button
to reduce the switch-on period (OFF) or
to extend the switch-on period (ON).
The day changes at 00:00 hours.
Confirm the setting.
Program all the other switching times.
Display the switching times from Monday to Sunday.
Each upward movement of the 5-way switch moves the display to the next switching state change. After the last switching state change in a
week, the display shows PROG END.
Altering/deleting programs
28 programs have been
stored. No more programs
can be added.
NO
PROG
No program set
TIME
DATE
SU WI
PROG
TEST
1 2 3 4 5 6 7
0
12
24
OFF
ON
Select the switching time
and
.
Use
to alter the switch-on period.
Turn the button
to reduce the switch-on period (OFF) or
to extend the switch-on period (ON).
Confirm the setting.
